Step 1

Installation

• Shut down the Mitchell/ShopKey management application.
• Click the download button in the Upper Right hand corner of this window and choose Run.

Step 2

• Enter the download code provided to you by your parts supplier and click next.

Step 3

• The default directory C:\aesServer will be displayed as the install to directory, click install and the installer will download and install all the required files for this integration. It will then prompt you to select Catalog you wish to install. Select either Auto Value or Bumper to Bumper to activate the button inside Mitchell. (Please make sure you have exited Mitchell Prior to Clicking Install).
  
• After you click install you will receive a message saying "Mitchell SDK installed successfully".
  

Step 4

• You may get a message saying "This Program might have not installed correctly" Double Click on "This program installed correctly".

Step 5

• Once installation is complete, and the "SE" application is opened/restarted, the AutoValue / Bumper to Bumper catalog needs to be turned on. To do this, go to home screen where the initial home screen is displayed, (not the WIP Screen). Select Configurations | Special Maintenance | Toggle Catalog Availability from the menu and then turn on AutoValue or Bumper to Bumper by clicking on the button and make sure the button is turned "On".
   
• With AutoValue or Bumper to Bumper turned on, you will need to setup the link for an existing Vendor or create a new Vendor record to setup the 'AutoValue Link' or 'Bumper to Bumper Link'. To do this, go to Configurations | Vendor Setup from the Configuration menu. Either Edit an existing Vendor or add a new Vendor. On the Edit Vendor screen, Click on Setup Link. Choose Setup AutoValue Link or Bumper to Bumper and click OK. (If another link is already selected, you will need to first Unlink it and then Setup the link to AutoValue or Bumper to Bumper). You will then be asked to provide a Username and Password.
  
  Note: You can use the MPFP Username and Password or use the download code in both fields. This is a required field and must be filled in but it does not affect the connection.
   
• Once you have entered your User Profile and Password and clicked OK, the AutoValue or Bumper to Bumper button will appear on the bottom section of your work orders. Your customer is now set up and ready to use the catalog.

Notice to Mitchell Users ONLY

A recent release has cause a problem for some Mitchell users. The following steps will fix this problem

We apologize for any inconvenience this has caused.

DOWNLOAD

Step 1

Installation

• Shut down the Mitchell/ShopKey management application.
• Click the download button in the Upper Right hand corner of this window and choose Run.

Step 1

Installation

• Exit the host system application.
• Click the download button in the Upper Right hand corner of this window and select Run.
• Enter the download code provided to you by your parts supplier and click next.

Step 2

• The default directory C:\aesServer is displayed, you may use this one or 'browse' to select another directory. Be sure the directory has r/w permissions.
   
• Click install and the installer will download and install all the required files for this integration.

At End

• You may get a message saying "This Program might have not installed correctly". Simply select "This program installed correctly".

Step 1

Installation

• Shut down the Bay-masteR management application
• Click the download button in the Upper Right hand corner of this window and choose Run.
• Enter the download code provided to you by your parts supplier and click next.

Step 2

• The default directory C:\aesServer will be displayed as the install to directory, click install and the installer will download and install all the required files for this integration.
   
• You may get a message saying "This Program might have not installed correctly" Double Click on "This program installed correctly"

Note:FOR CLOUD BASED VERSION PLEASE CONTACT Bay-masteR Support - No Install Required.

Step 1

Installation

• Exit the host system application.
• Click the download button in the Upper Right hand corner of this window and select Run.
• Enter the download code provided to you by your parts supplier and click next.

Step 2

• The default directory C:\aesServer is displayed, you may use this one or 'browse' to select another directory. Be sure the directory has r/w permissions.
   
• Click install and the installer will download and install all the required files for this integration.

At End

• You may get a message saying "This Program might have not installed correctly". Simply select "This program installed correctly".

Step 1

Installation

• Exit the host system application.
• Click the download button in the Upper Right hand corner of this window and select Run.
• Enter the download code provided to you by your parts supplier and click next.

Step 2

• The default directory C:\aesServer is displayed, you may use this one or 'browse' to select another directory. Be sure the directory has r/w permissions.
   
• Click install and the installer will download and install all the required files for this integration.

At End

• You may get a message saying "This Program might have not installed correctly". Simply select "This program installed correctly".

Step 1

Installation

• Exit the host system application.
• Click the download button in the Upper Right hand corner of this window and select Run.
• Enter the download code provided to you by your parts supplier and click next.

Step 2

• The default directory C:\aesServer is displayed, you may use this one or 'browse' to select another directory. Be sure the directory has r/w permissions.
   
• Click install and the installer will download and install all the required files for this integration.

At End

• You may get a message saying "This Program might have not installed correctly". Simply select "This program installed correctly".

Step 1

Installation

• Exit the host system application.
• Click the download button in the Upper Right hand corner of this window and select Run.
• Enter the download code provided to you by your parts supplier and click next.

Step 2

• The default directory C:\aesServer is displayed, you may use this one or 'browse' to select another directory. Be sure the directory has r/w permissions.
   
• Click install and the installer will download and install all the required files for this integration.

At End

• You may get a message saying "This Program might have not installed correctly". Simply select "This program installed correctly".

Step 1

Installation

• Exit the host system application.
• Click the download button in the Upper Right hand corner of this window and select Run.
• Enter the download code provided to you by your parts supplier and click next.

Step 2

• The default directory C:\aesServer is displayed, you may use this one or 'browse' to select another directory. Be sure the directory has r/w permissions.
   
• Click install and the installer will download and install all the required files for this integration.

At End

• You may get a message saying "This Program might have not installed correctly". Simply select "This program installed correctly".

Step 1

Installation

• Exit the host system application.
• Click the download button in the Upper Right hand corner of this window and select Run.
• Enter the download code provided to you by your parts supplier and click next.

Step 2

• The default directory C:\aesServer is displayed, you may use this one or 'browse' to select another directory. Be sure the directory has r/w permissions.
   
• Click install and the installer will download and install all the required files for this integration.

At End

• You may get a message saying "This Program might have not installed correctly". Simply select "This program installed correctly".

Step 1

Installation

• Exit the host system application.
• Click the download button in the Upper Right hand corner of this window and select Run.
• Enter the download code provided to you by your parts supplier and click next.

Step 2

• The default directory C:\aesServer is displayed, you may use this one or 'browse' to select another directory. Be sure the directory has r/w permissions.
   
• Click install and the installer will download and install all the required files for this integration.

At End

• You may get a message saying "This Program might have not installed correctly". Simply select "This program installed correctly".

Step 1

Installation

• Exit the host system application.
• Click the download button in the Upper Right hand corner of this window and select Run.
• Enter the download code provided to you by your parts supplier and click next.

Step 2

• The default directory C:\aesServer is displayed, you may use this one or 'browse' to select another directory. Be sure the directory has r/w permissions.
   
• Click install and the installer will download and install all the required files for this integration.

At End

• You may get a message saying "This Program might have not installed correctly". Simply select "This program installed correctly".

Step 1

Installation

• Exit the host system application.
• Click the download button in the Upper Right hand corner of this window and select Run.
• Enter the download code provided to you by your parts supplier and click next.

Step 2

• The default directory C:\aesServer is displayed, you may use this one or 'browse' to select another directory. Be sure the directory has r/w permissions.
   
• Click install and the installer will download and install all the required files for this integration.

At End

• You may get a message saying "This Program might have not installed correctly". Simply select "This program installed correctly".

Step 1

Installation

• Shut down the Pace – Yes Management application
• Click the download button in the Upper Right hand corner of this window and choose Run.
• Enter the download code provided to you by your parts supplier and click next.

Step 2

• The default directory C:\aesServer will be displayed as the install to directory, click install and the installer will download and install all the required files for this integration.
   
• You may get a message saying "This Program might have not installed correctly" Double Click on "This program installed correctly"

Step 1

Installation

• Shut down the TIRESHOP application
• Click the download button in the Upper Right hand corner of this window and choose Run.
• Enter the download code provided to you by your parts supplier and click next.

Step 2

• The default directory C:\aesServer will be displayed as the install to directory, click install and the installer will download and install all the required files for this integration.
   
• You may get a message saying "This Program might have not installed correctly" Double Click on "This program installed correctly"

This integration requires information for your Supplier for AConneX or IAP. Please contact your Supplier for the information needed and then click on the link below for your request.

Step 1

Installation

• Shut down the G2 application
• Click the download button in the Upper Right hand corner of this window and choose Run.
• Enter the download code provided to you by your parts supplier and click next.

Step 2

• The default directory C:\aesServer will be displayed as the install to directory, click install and the installer will download and install all the required files for this integration.
   
• You may get a message saying "This Program might have not installed correctly" Double Click on "This program installed correctly"

Contact G2 Support at 1 800.466.5518

Step 1

Installation

Note:  Specialized Integration for Bennett Auto.

Step 1

Installation

• This integration is for AC Delco and allows their users to Integrate to the MyPlaceFopParts Sell Network for their Auto Value / Bumper to Bumper Parts Suppliers.
• Please contact your parts supplier and request them to have their MyPlace Admin to submit an i-Support ticket for WHI Nexpart Credentials for Parts Warehouse Inc..

Step 1

Installation

• This integration is specialized for specific Auto Value Stores only. Please contact VinniStore.ca for a complete list of stores that participate.
• Please contact VinniStore.ca with any questions.https://www.vinnistore.us/en_us/contacts
• Emails:

  sales@vinnistore.us
  support@vinnistore.us

• Head Office:

  7575 Trans-Canada Highway, Suite 500
  Saint-Laurent, QC H4T 1V6
  Canada.

Step 1

Installation

• Email Support@protractor.com you Seller / Buyer ID provided by your Parts Supplier. Protractor support will configure and show the user how to use the Alliance – Auto Value/ Bumper to Bumper connection inside their Catalog.

Step 1

Installation

• Shut down the STOCKTRAC management application
• Click the download button in the Upper Right hand corner of this window and select Run.
• Enter the download code provided to you by your parts supplier and click next.

Step 2

• The default directory C:\aesServer will be displayed as the install to directory, click install and the installer will download and install all the required files for this integration.

At End

• You may get a message saying "This Program might have not installed correctly" Double Click on "This program installed correctly"

CONTACT STOCKTRAC SUPPORT FOR ASSITANCE CONFIGURING THIS CATALOG INSIDE STOCKTRAC. support@stocktrac.com

800-782-5872 for United Stated

800-323-5872 for Canada

Step 1

Installation

• Email your support contact at Prositrak the Seller / Buyer ID provided by your Parts Supplier. Positrak support will configure and show the user how to use the Alliance – Auto Value/ Bumper to Bumper connection inside their system.

Step 1

Installation

• Shut down the FASTTRAK management application
• Click the download button in the Upper Right hand corner of this window and select Run.
• Enter the download code provided to you by your parts supplier and click next.

Step 2

• The default directory C:\aesServer will be displayed as the install to directory, click install and the installer will download and install all the required files for this integration.

At End

• You may get a message saying "This Program might have not installed correctly" Double Click on "This program installed correctly".

Step 1

Installation

• Email Support@protractor.com you Seller / Buyer ID provided by your Parts Supplier. Protractor support will configure and show the user how to use the Alliance – Auto Value/ Bumper to Bumper connection inside their Catalog.

Step 1

Installation

• Email your support contact at PARTSTECH the Seller / Buyer ID provided by your Parts Supplier. PARTSTECH support will configure and show the user how to use the Alliance – Auto Value/ Bumper to Bumper MyPlace Sellnetwork inside their system.

Step 1

Installation

Note:  Specialized Integration.